Fgtech galletto 4 master China Galetto 4 v54 master Fgtech v54 galletto 4 “Can not find driver” error solution

Update from the galletto 3, Fgtech galletto 4 master is Fgetch Galletto master ecu tool. Multi-languages China Galetto 4 v54 master with 2014 V54 unlock software, there is no need to activatd. Many customers have prolmws when they use the BDM Fgtech V54. Below OBD2TUning sharing Fgtech galletto 4 master China Galetto 4 v54 master Fgtech v54 galletto 4 “Can not find driver” error solution. 

Fgtech galletto 4 v54 Fgtech v54 Unlock Galletto v54 master

Fgtech galletto 4 v54 Fgtech v54 Unlock Galletto v54 master

Fgtech galletto 4 master China Galetto 4 v54 master Fgtech v54 galletto 4 “Can not find driver” error solution:

1) Download and install the Virtual Com Port drivers from FTDI website:

Virtual COM Port Drivers
http://www.ftdichip.com/Drivers/VCP.htm

2) Then connect the FGTech to computer via USB port which had no device programmed and 1 blank device when the MProg Utility it shows.

NOTE: If you had backup and reprogram with the ept file. The system will not recognize the FGTECH and will not reprogram the firmware bin file. The Virtual Com Port Drivers would overlay the fgtech ECU programmer. Then you have to again download the related driver in FTDI website.

CMD Uninstaller 1.4
http://www.ftdichip.com/Support/Utilities.htm

3) After install the right drivers, FTReadWrite programmed the backup firmware file, run galletto v54 software by referring to the user manual

This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.