Man EURO 6 AdBlue Emulator Original AdBlue Emulator man euro 6 Trucks simulation Test device

Man EURO 6 AdBlue Emulator is Adblue emulator OBD2 EURO 6 Trucks Adblue System Simulation Device. Original EURO 6 AdBlue Emulator man euro 6 Trucks not use to MAN Truck, also support DAF, VOLVO Scania trucks and other Euro6 transport. OBD2Tuning.com Man EURO 6 AdBlue Emulator Original AdBlue Emulator man euro 6 Trucks simulation Test device. 

Original Man EURO 6 AdBlue Emulator New SRS AdBlue Emulator DAF/VOLVO/SCANIA/MAN EURO 6



OBD2Tuning.com Man EURO 6 AdBlue Emulator using guide:

Emulator Man Euro 6 not need to be learned. We Mount emulator under the metal cover of AdBlue Pump. On the right side behind the cab. We need disconnect plug from AdBlue Pump and connect emulator.

Next we need to remove the fuses:
F894(Multisensor In AdBlue tank)
F738 (+30 Signal of AdBlue pump)
F1084(NOx sensor Upstream)

Fuse F737 is now fuse of emulator.
Fuse F1109 is the fuse of NOx sensor Downstream and A1191 mufler temperature sensor. This sensor need to work correctly for DPF regenaration.

The last thing that we need to do is remove Power from NOx downstream sensor. There is two way to do that. Cut pin 1 in NOx sensor plug. The second way (better) is remove pin 10 in X3212 plug. This plug is visible on rear of engine, right side. This is TE plug (16 pin) wiht yellow key. 

OBD2Tuning.com Focus on OBD Tool Since 2008

https://www.facebook.com/obd2tuning/

This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.