Piwis tester ii vci with V16.8 porsche piwis 2 software installed on panasonic cf-30 toughbook
Piwis tester ii vci with V16.8 porsche piwis 2 software installed on panasonic cf-30 toughbook
Porsche piwis tester ii vci with V16.8 Piwis tester2 software Porsche tester ii vci Self-Check Not Working,Hard Disck Data Lost solution:
Tip 1, actually theobd2tuning.com Piwis tester 2 self-check function is not working, do not click [Settings] – [VCI Configuration], otherwise you will get error.
Tip 2, Piwis tester2 from obd2tuning.com hard disk is not compatible with other computer, but only CF30 packed with Piwis tester 2.Do not take outthe hard disk from the CF30 laptop and install it on other computers, otherwise the data maybe get lost and hard to recover.
OBD2Tuning.com engineer advises piwis users follow his instructions step by step as shown below, improper operation will cause error:
Step 1.Start the car or turn on ignition.
Step 2.Connect PIWIS to the car, wait until the indicator light flashes then connect USB cable to the computer.
Step 3.Choose car model you want to test.
Step 4.Enter PIWIS TESTER II diagnostics.
Step 5.When the system appears “Control unit selection: Loading control unit selection”, it means Porsche PIWIS TESTER 2 is working.
Please Kindly Notice: you won’t see control unit list if piwis not connect properly or piwis has something wrong.
That’s all for the information about when obdt2uning.com Piwis Tester 2 VCI Self-Check Not Working,Hard Disck Data Lost what to do , hope it would help you !
This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.
沒有留言:
張貼留言