VAG DASH CAN 5.29 China VAG DASH CAN V5.29 VAGDASHCAN 5.29 Support Car Models list

VAG DASH CAN 5.29 is the high-performance tool covers up the new generation of instrument clusters from 2002. VAG DASH CAN V5.29 can work for GolfV, Touran, Passat B6, Jetta, the new Seat models, such as Altea II and the new Skodas. What's more, VAG dash CAN V5.29 can support multi-functions for VW / SEAT /SKODA. Below OBD2Tuning sharing VAG DASH CAN 5.29 China VAG DASH CAN V5.29 VAGDASHCAN 5.29 Support Car Models list. 

VAG DASH CAN 5.29 VAGDASHCAN 5.29 VAG DASH CAN V5.29



VAG DASH CAN 5.29 China VAG DASH CAN V5.29 VAGDASHCAN 5.29 Support Car Models list:

VW / SEAT / SKODA
Please press this button in order to read out the VDO instrument clusters of the last generation. An example is the Golf Mark V from 2003 up to 06.2006.
Some SEAT and SKODA models are equipped with clusters of that type until MY 2009.

PASSAT

Please press this button in order to read out Passat B6.
In those cars you cannot get immobiliser information from the instrument clusters, since the immobiliser unit is part of the convenience module.

AUDI A3
Please press this button in order to read out AUDI A3 instrument clusters of the brand VDO.

AUDI-A4
Please press this button in order to read out AUDI A4 instrument clusters BOSCH RB4.

PHAETON/TOUAREG
Please press this button in order to read out Phaeton and Touareg instrument clusters BOSCH RB4.

BOSCH EDC15
Diesel Control units are very often used since 1999. Those units cover up most of the diesel vehicles at VAG.
SEAT and SKODA equipped their cars some years longer with ecu´s of that kind.

BOSCH EDC16
Those Diesel Control units are built into cars since 2002. They are the most frequently use ECUs in Diesel Cars of the latest generation.

ME7.* /MED 9.5
The engine ecu type BOSCH ME7.* was used in petrol cars such as Golf IV or Audi TT. You can read out following types of ecu´s: ME7.5, ME7.1, ME7.5.1, ME7.1.1.
The ecu ME7.1.1 of the Golf V is not implemented yet.

ME7 CHANNELS
When you click on this button, you reach the EEprom adaption channels of the BOSCH ME7.* engine control unit. Those are for example the SEL scaling and the idle speed offset.

IMMOBILISER BOXES
When you click on this button you can read out the login code from the single standing Immobiliser units. Whit boxes from Audi A4 with 12pin connector and boxes from LT. As well you can read out boxes from 1994-1998, but only when an adapted key is inserted into the lock.

This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.

China kess v2 2.15 master Clone with kess 4.036 firmware and new kess -k-suite 2.15 software for sale

China kess v2 2.15 master Clone is update version from the Kess V2 2.13. China Kess V2 2.15 new add available for VAG Group equipped with ECU ECU BOSCH GPT EDC17C74, BOSCH EDC17CP14 GPT and for Aston Martin equipped with BOSCH GPT ME17.8.31.OBD2Tuning have China kess v2 2.15 master Clone with kess 4.036 firmware and new kess -k-suite 2.15 software for sale.

China Kess v2 2.15 Master Kess 4.036 Firmware K-suite 2.15 Kess

KESS V2 firmware: kess v2 4.036

Kess v2 software: k-suite 2.15 (Support for Both China KESS v2 and KTAG master)

Update: Via CD

Features: New LPC2478 Chip

Support Languages: English, German, Spanish, Italian, Portuguese, French

Operating system: Win XP / Win 7

Kess V2 2.15 kess v2 4.036 highlights:

1. This KESS V2 2.15 from obd2tuning come with umlimited tokens by Using Kess v2 NXP Tokens Chip.

2. Kess v2 4.036 No Checksum Error.

3. China kess v2 2.15 master Read and write ECU via OBD2 port directly, no need disassemble ECU from the car, easy to use; for BDM function, you can buy Ktag master V2.15 or Fgtech Galletto V54 from us.

4. Kess v2 2.15 Works for bike and car. For trucks, ktag will be a good choice.

5. With coverage of all major brands and protocols including Line, CAN, EDC17 and MED17 and Ford J1850. Kess V2 2.15 is everything you need to work as a successful tuner at a very affordable price.

This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.

China Kess v2 master Kess v2 2.15 K-suite 2.15 software Kess 4.036 Firmware unlmited tokens version with Renew Button

China Kess v2 master Kess v2 2.15 is Kess v2 2.13 Update version. China Kess v2 2.15 software K-suite 2.15 vailable for all the China KTag master that have an active subscription and tricore enabled. OBD2Tuning China Kess v2 master Kess v2 2.15 K-suite 2.15 software Kess 4.036 Firmware unlmited tokens version with Renew Button. 

Kess v2 2.15 Clone K-suite 2.15 Kess 4.036 Unlimited Tokens

Kess v2 2.15 Clone K-suite 2.15 Kess 4.036 Unlimited Tokens

KESS V2 firmware: kess v2 4.036

Kess v2 software: k-suite 2.15 (Support for Both China KESS v2 and KTAG master)

Update: Via CD

Features: New LPC2478 Chip 
 
Support Languages: English, German, Spanish, Italian, Portuguese, French

Operating system: Win XP / Win 7

Features: 

1.) Kess v2 2.15 With Renew Button, Tokens can be reset when it used up.
                 
2.) Unlimited Tokens Kess v2 2.15 Add more latest protocols and ECUs, more detailed cable connection instruction

Notice: 

1. Please do not update this tool online. Please Do remember disconnect internet when you use this tool. Do not update it online. It will damage the tool.
2. This one can not works on Truck.
3. Turn off your anti-virus software when start the software. It is not virus, it is just crack software will be recognize as virus.
4. The computer which you have installed KESS or KTAG software on cannot connect with internet anytime and anywhere
 
V2.15 KESS V2 Token Reset:



New KESS V2 2.15 master add one renew button on the main unit. This button is used to charge tokens. Once your tokens run over, just click this button, then tokens will go back to 30 tokens. You can go on to use it again. No need change new tokens chip, no need desolder and program the tokens chip. More easily than ever.

V2.15 KESS V2 Software Display:

This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.

Unlimited Tokens China KESS V2 V2.13 master Kess 4.036 Firmware K-suite 2.13 software with Kess Tokens Renew Button

Unlimited Tokens China KESS V2 V2.13 master is the best obd2 ecu chip tuning tool for EDC17.  China KESS V2 V2.13 master could assistance Bosch EDC17(BMW, CHRYSLER/FAL/JEEP Tprot11,DDE8 BMW/MINI, Deutz, Fiat, Ford, Honda, Iveco, JCB, Jeep, Kia, Land Rover, Merecedes, Mitsubishi, Nissan/Renault, Opel, Piaggio),EDC17 CP02/C06 CAN/KLINE etc. OBD2Tuning Unlimited Tokens China KESS V2 V2.13 master Kess 4.036 Firmware K-suite 2.13 software with Kess Tokens Renew Button. 

V2.13 Kess v2 Clone Kess v2 2.13 master Kess v2 4.036 Add Renew Button  

V2.13 Kess v2 Clone Kess v2 2.13 master Kess v2 4.036 Add Renew Button  

V2.13 KESS V2 Token Reset:

New KESS V2 2.13 master add one renew button on the main unit. This button is used to charge tokens. Once your tokens run over, just click this button, then tokens will go back to 30 tokens. You can go on to use it again. No need change new tokens chip, no need desolder and program the tokens chip. More easily than ever.

Reasons to Get V2.13 KESS V2 Unlimited Token Version Firmware V4.036: 

1. Software Version: V2.13  Firmware Version: V4.036
2. Master Version, Add Renew Button, No Token Limitation
3. Check of the battery voltage in real-time
4. Full Recovery function in case of problems
5. Automatic correction of the Checksum, (where available)
6. Boot-Loader mode supported
7. Management of the programming counters
8. Scan Tool function to remove DTC
9. Several options of reading/writing speed
10. Option to write full file/section of the map
11. Full integration with ECM Titanium, which means it can work with ECM Titanium perfectly

This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.

China Ktag 2.15 master Ktag k-suite 2.15 Ktag firmware V7.003 new release

China Ktag 2.15 master is china ktag master clone ECU tuning tool. Alientech cracked and release K-suite 2.15 software for kess v2 and ktag. OBD2Tuning China Ktag 2.15 master Ktag k-suite 2.15 Ktag firmware V7.003 new release. 

Ktag 2.15 master Ktag firmware V7.003 Ktag KTM100 V2.15 No tokens limited

Ktag 2.15 master Ktag firmware V7.003 Ktag KTM100 V2.15 No tokens limited

Newest 2.15 k-suite ktag ecu programmer can flexible and easy to adapt to your needs, compatible with most vehicles and available for the 8, 16, and 32 bit microprocessors.

Ktag 2.15 firmware works for reading and writing of the individual Processor, EEPROM, and flash memory components, also, support removal of the write-protection to allow for flashing via OBD.

This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.

China Kess v2 update Kess V2 2.15 with K-suite 2.15 software for kess v2 master release soon

China Kess v2 update version kess v2 2.15 is new kess v2 clone version. Kess V2 2.15 with K-suite 2.15 software allow user to read and write the ECUs of cars, bikes, trucks, tractors and boats. OBD2Tuning China Kess v2 update Kess V2 2.15 with K-suite 2.15 software for kess v2 master release soon.

Unlimited tokens Kess v2 2.15 China kess v2 4.036 firmware kess

Unlimited tokens Kess v2 2.15 China kess v2 4.036 firmware kess

Kess v2 Firmware: 

The Master version of the obd2 tuning kess v2 2.15 allows you the complete access to the stock files located in the ECU. Once read and modified, the KESSv2 will allow you to rewrite (FLASH) the edited file back to the OEM ECU.

Kess v2 k-suite 2.15 software: 

K-Suite, included in the KESS v2 tuning tool, is the software the allows you to read and write the ECUs of cars, bikes, trucks, tractors and boats. You can save it on your Windows PC and then edit the files with your dedicated mapping software to get the best from your OBD tuning equipment.

Whole V2.15 kess v2 ecu tuning tool support:

- Identifies the vehicle you wish to work on
- Monitors the battery voltage
- Saves the vehicle’s original injector codes, whenever there is the risk of a loss
- Checks and clears any DTC in the ECU
- Automatic Checksum Correction
- Writing the flash is always accomplished, even in the event of PC malfunctions.
- Restore capabilities in the event of error

This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.

Peugeot Citroen TPMS trigger tool Peugeot Citroen TPMS sensor activation tool new release

Peugeot Citroen TPMS trigger tool for Peugeot Citroen cars till 2015 year. Peugeot Citroen TPMS sensor activation tool can check RKE &RF monitor Special for 4S Shop. OBD2Tuning have Peugeot Citroen TPMS trigger tool Peugeot Citroen TPMS sensor activation tool new release. 

TPMS trigger tool for Peugeot Citroen Tyre pressure sensor valve repair kit

TPMS trigger tool for Peugeot Citroen Tyre pressure sensor valve repair kit 

Factory: YANTAK

Special: for 4S Shop

Support: Peugeot & Citroen cars from 2000 till 2015 year

Peugeot Citroen TPMS trigger tool Functions:

1. Activate Peugeot Citroen TPMS sensors. 
2. Check RKE & RF monitor.

Peugeot Citroen tpms sensor activation tool support car list:

Regin	Automaker	Model	Year
European	Peugeot	207	2006.04-
European	Peugeot	307	-2007 2007.03-2015
European	Peugeot	308	2007.09-2015
European	Peugeot	308 SW	2008-
European	Peugeot	3008	2009-2015
European	Peugeot	5008	2009-2015
European	Peugeot	407	2004.09-
European	Peugeot	407 SW	2004.09-
European	Peugeot	407 Coupe	2005.09-
European	Peugeot	607	2000.05-2004.09
European	Peugeot	607 II	2004.10-
European	Peugeot	807	2002.06-2005.09 2005.10-
European	Citroen	C4	2005.01-2007.12 2008.08-2015
European	Citroen	C4 Coupe	2005.01-2007.12
European	Citroen	C5 I	2001.03-2004.07
European	Citroen	C5 II	2004.08-
European	Citroen	C5 III	2008-2015
European	Citroen	C6	2005.11-
European	Citroen	C8	2002.06-2005.09 2005.10-
European	Citroen	Picasso C4	2006.09-
European	Citroen	Picasso C4 restyle	2008.08-
European	Citroen	DS 5	2011-2015
European	Citroen	DS 6	2014-2015

This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.

Recommend GM MDI scanner Wifi Version GM MDI Tech 3 diagnostic interface wireless function

GM MDI scanner Wifi Version is the GM tech 2 scanner replacement All works as it described. Wifi Version GM MDI Tech 3 diagnostic interface not only work for the new gm car,but also for the old kind of car. OBD2Tuning Recommend GM MDI scanner Wifi Version GM MDI Tech 3 diagnostic interface wireless function. 

Wifi GM mdi module GM tech 3 scanner with GM MDI wireless card

Wifi GM mdi module GM tech 3 scanner with GM MDI wireless card

Recommend GM MDI scanner Wifi Version GM MDI Tech 3 diagnostic interface wireless function: 

1. What cars does it support??

GM MDI scanner wifi version support GM cars from 1990 - 2012. Also include GM, Opel, Chvelet, SAAB.

2. Programming function Supported

 Wifi GM MDI interface support online programming, just need the account from GM company.

3. Works with original Software

GM MDI wifi scanner support the original software and update online.

4. Good after-service, long time warranty

support GM MDI software activation and installation by teamviewer, after customers get the item, pls kindly help give us teamviewer version 9 ID and password, then obd2tuning.com technical support will do GM MDI software activation and installation.

This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.

Porsche piwis tester 2 VCI V15.6 Piwis tester ii diagnostic tool for sale

Porsche piwis tester 2 VCI  works for more porsche model till 2015 year.  Piwis tester ii diagnostic tool not only diagnose, programming porsche, also support engine, airconditioner, SRS, ABS, ASR ,.etc. OBD2Tuning have Porsche piwis tester 2 VCI V15.6 Piwis tester ii diagnostic tool for sale. 

V15.6 Piwis tester ii vci For Porsche Piwis tester 2 installed Panasonic CF30 Tablet PC 

V15.6 Piwis tester ii vci For Porsche Piwis tester 2 installed Panasonic CF30 Tablet PC 

1. Software Version: V15.6 (Return back the hdd for update, update cost is different according to the QC number,if the last three numbers of your QC mark is 137,hdd cost is70USD,if the last three numbers of your QC mark is 098, hdd cost is 176USD, contact customer sevice for more details )
2. Laptop: CF-30 (Second Hand)---Software is inside the Hard Drive. No need Installation
3. Support Languages: Russian, English, French, Spanish, Italian, German, Portuguese, Japanese, Chinese, Dutch
4. Update Method: By HDD (Need to return hard disk to us for upgrade, or you can just buy from us another hdd with newest software) Software contains operating system win XP only. you just need to insert into your computer and use it.
5. Requires Online Modules: (F BCM R BCM DME ELV SRS KEY)
6. Bluetooth, GPS and Navigation Function are available. But need to pay for the authorization of them.
7. Support Key Programming function, cost 220USD per time (you need consult our customer sevice first with the type and year of your car)
                 
This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.

How to do Mercedes SDS Multiplexer Star diagnosis compact 4 MB SD Connect C4 Offline SCN Coding

Mercedes SDS Multiplexer Star diagnosis compact 4 support scn coding by online and offline. Need to know How To Do Offline SCN Coding By MB SD C4 And DAS? Below OBD2Tuning sharing How to do Mercedes SDS Multiplexer Star diagnosis compact 4 MB SD Connect C4 Offline SCN Coding.

MB Compact 4 scanner SD connect c4 wireless ThinkPad X61T

MB Compact 4 scanner SD connect c4 wireless ThinkPad X61T

How to do Mercedes SDS Multiplexer Star diagnosis compact 4 MB SD Connect C4 Offline SCN Coding: 

Requirement for offline SCN coding:
–STAR DIAGNOSIS (MB SD CONNECT COMPACT 4 is the most reputable in the market now) diagnosis system with printer
–Fax

This is the detailed instructions to display offline SCN coding via Star diagnostic software Diagnosis Assistance System (DAS).

Steps for offline SCN coding:
A) Determine vehicle data for offline SCN coding from the vehicle.
1 Select control unit in DAS.
2 Select menu item “control unit adaptations” or “initial startup”.
Continue with “F3″.
3 Select menu item “SCN coding”. Continue with “F3″.
4 Select “Offline (STAR DIAGNOSIS device not-networked)” menu item. Continue with “F3″.
5 Confirm note on sequence of SCN coding with “F2″.
6 Completely fill out fax form and click “F11″ to print out.
Please Kindly Notice:If an email address is entered in the fax form, you will be sent the SCN coding data per email. If a fax number is entered in the fax form, you will be sent the SCN coding data per fax.
7 Send printed out fax form to the given fax no. for the Star Diagnosis Help Desk.

B) Perform SCN coding. The coding is performed with the SCN coding data from the Star Diagnosis Help Desk.
Please Kindly Notice: If the SCN coding data are received per email, burn the data to a CD or save the data on a USB removable storage device and identify accordingly. Unpack the Zip files first when doing so.
8 In the DAS, choose the “Step 2: Perform SCN coding” menu item. Continue with “F3″.
9.1 Select keyboard input using “F4″.
For SCN coding data per fax.
9.2 Insert CD or connect USB removable storage device.
For SCN coding data per email.
10.1 Enter SCN coding data manually into the DAS.
For SCN coding data per fax.
10.2 Confirm using “F3″ and import the data per CD or USB removable storage device.
For SCN coding data per email.
11 Perform SCN coding.
12 Switch ignition on/off.
Control unit specific, refer to specification in DAS.
13 Press “F11″ to print out the order log and enclose the repair order.
Please Kindly Notice: The order log can also be stored on the DAS. This is done by clicking on “F11″, “Print to file”, selecting “printout of test step” and entering a file name. In StarUtilities, the StarPad program can be used to display and printout the order log at the “Logs” menu item.
14 Continue with “F2″.
Please Kindly Notice: The SCN coding of the control unit is completed. Scrap the CD following successful SCN coding as per the guidelines for theft-relevant parts (DTR 69/00). The scrapping process is to be documented on the repair order. The data on the USB removable storage device are to be deleted properly once they have been used.

PS. Here, we highly recommend you to buy the plug-and-play star diagnostic bundle (SD C4 with laptop)for your programming to in case of unnecessary inconvenience, such as installation problem.
                                                                                                          
This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.

Wifi GM MDI scanner GM tech 3 Multiple Diagnostic Interface China GM MDI wireless with Original Chip

Looking forward to a perfect diagnosis for you GM cars? OBD2Tuning offers a cheap but best-quality GM MDI scanner with wifi version only $429, which allows you to do whatever you want. OBD2Tuning Wifi GM MDI scanner GM tech 3 Multiple Diagnostic Interface China GM MDI wireless with Original Chip.

Wifi GM mdi module GM tech 3 scanner with GM MDI wireless card

Wifi GM mdi module GM tech 3 scanner with GM MDI wireless card

Because obd2tuning clone Wifi GM MDI Multiple Diagnostic Interface comes with the original chip, it has the same function as the original one and can be used with the original software.

-- the same function as the original one (diagnosis, programming, communication...)

1.with opel Global tis global diagnostic system

Note: Free download: Video for how to set up the Global TIS MDI online and offline programming

(Link:http://www.mediafire.com/download/h8g8f36ds3q19xr/gm-mdi-global-tis-online-offling-setup.avi )

2. with GDS2 diagnostic system

3. support offline lease function

4. support Opel offline programming function

5. tech2 win diagnostic software support adding latest software

6. support programming online

Note: But for this function, you need to open and buy the online programming software from the original factory, http://www.gmtechinfo.com/. Then you can directly buy the software and use it.

7. support cable communication

8. support wireless communication

9. support original factory latest software

10. With European Chevetl Global tis, it supports European Chevetl offline programming

Note: If you need Linear programming account , you can buy from: http://www.gmtechinfo.com/.
                                                                                                                                   
This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.